Dual glasses 440W 9BB M6(166mm) Mono PERC Half Cell bifacial solar
panel
FSM430~FSM440M60HL (430W/435W/440W) MONO PERC Half-Cell Bifacial PV
Module
KEY FEATURES
- Bifacial 9 Busbar M6 Mono Half-Cell adopts PERC technology to
guarantee higher output power and higher module efficiency.
- Mono PERC Half-Cell PV module offers better temperature-dependent
performance, less shading effect on the energy generation, lower
risk of hot spot.
- Excellent Anti-PID performance guarantee limited power degradation
for mass production.
- Double glasses encapsulation guarantees 20 years life time warranty
and 30 years linear power warranty.
- Advanced glass and cell surface textured design ensure excellent
performance in low-light environments (e.g. early morning, dusk and
cloud, etc).
- Module power increases 5%~25% from backside (as per different
reflective condition), lower LCOE and higher IRR.
- 100% EL inspection and power test before packing.
- Separate trackable barcode on each product for quality tracing.
Electrical Characteristics under STC
| Module Type | FSM430M72HL | FSM435M72HL | FSM440M72HL |
| Maximum Power-Pmax (Wp) | 430 | 435 | 440 |
| Voltage at Maximum Power-Vmp (V) | 40.6 | 40.8 | 41.0 |
| Current at Maximum Power-Imp (A) | 10.60 | 10.67 | 10.74 |
| Open Circuit Voltage-Voc (V) | 49.2 | 49.4 | 49.6 |
| Short Circuit Voltage-Isc (A) | 11.19 | 11.26 | 11.33 |
| Module Efficiency-ηm (%) | 19.5% | 19.7% | 19.9% |
| Operating Temperature | -40℃ to +85℃ |
| Maximum System Voltage | 1000V/1500V DC (IEC) |
| Power Tolerance | 0~+4.99W |
| Temperature Coefficients of Pmax | -0.350%/℃ |
| Temperature Coefficients of Voc | -0.289%/℃ |
| Temperature Coefficients of Isc | 0.048%/℃ |
Mechanical Characteristics
| Cell Type | M6 (166mm) 9BB MONO PERC 166×83mm |
| No. of Cells | 144 (72×2) |
| Dimension | 2108×1048×30mm |
| Weight | 26 Kg |
| Junction Box | IP68, 3 diodes (3*20A) |
| Output Cables | 4.0mm², 500mm Length |
| Connectors | MC4 compatible |
| Packing | 32PCS/Pallet, 704PCS/40’HC |
FAQ of Finergy Solar Panels
Q1: Is Finergy's bifacial solar panel with dual glasses much
heavier?
A: It's correct that double glasses will be heavier. In this case,
Finergy is using 2 pieces of 2mm thickness glasses. By the way,
we're using 30mm aluminum frames with dual glasses. It's strong
enough. Finally, the total weight is only 2kg heavier per piece. It
will be no big problem on projects installations.
Q2: Why the product warranty of dual glasses solar panel is longer?
A: For the normal solar panels, the material of rear side is
polymeric backsheet. It's a damage for solar panel to work under
the sun. For glass, the life time is longer. In this case, we can
provide 20 years product warranty on dual glasses solar panels.
Q3: What's the extra power generation gain for floating solar power
project?
A: The extra power gain is generated from the rear side. We have to
use bifacial solar cells inside panels. The solar cells on the rear
side can generate power from reflected sunlight. As per our test,
customer will gain 5% extra power from water. It's the incremental
benefit to the project owner. We only sell in accordance with peak
power.
Advanced Automated Production and Inspections
Projects Installed with Finergy Bifacial Solar Panels
