FSM430~FSM440M60HL (430W/435W/440W) 9BB M6 MONO PERC Half-Cell PV
Module
KEY FEATURES
- 9 Busbar M6 Mono Half-Cell adopts PERC technology to guarantee
higher output power and higher module efficiency.
- Mono PERC Half-Cell PV module offers better temperature-dependent
performance, less shading effect on the energy generation, lower
risk of hot spot.
- Excellent Anti-PID performance guarantee limited power degradation
for mass production.
- Around 0.55% annual power degradation and 30 years linear power
warranty
- Advanced glass and cell surface textured design ensure excellent
performance in low-light environments (e.g. early morning, dusk and
cloud, etc).
- Module power increases 5%~25% generally (as per different
reflective condition), lower LCOE and higher IRR.
- Light weight design using transparent backsheet for easy
installation and low BOS cost.
- Three channels of EL automatic detections and power test before
packing
Electrical Characteristics under STC
| Module Type | FSM430M72HL | FSM435M72HL | FSM440M72HL |
| Maximum Power-Pmax (Wp) | 430 | 435 | 440 |
| Voltage at Maximum Power-Vmp (V) | 40.6 | 40.8 | 41.0 |
| Current at Maximum Power-Imp (A) | 10.60 | 10.67 | 10.74 |
| Open Circuit Voltage-Voc (V) | 49.2 | 49.4 | 49.6 |
| Short Circuit Voltage-Isc (A) | 11.19 | 11.26 | 11.33 |
| Module Efficiency-ηm (%) | 19.8% | 20.0% | 20.2% |
| Operating Temperature | -40℃ to +85℃ |
| Maximum System Voltage | 1000V/1500V DC (IEC) |
| Power Tolerance | 0~+4.99W |
| Temperature Coefficients of Pmax | -0.350%/℃ |
| Temperature Coefficients of Voc | -0.289%/℃ |
| Temperature Coefficients of Isc | 0.048%/℃ |
Mechanical Characteristics
| Cell Type | 9BB MONO PERC 166×83mm |
| No. of Cells | 144 (72×2) |
| Dimension | 2094×1038×35mm |
| Weight | 24 Kg |
| Junction Box | IP68, 3*22A diodes |
| Output Cables | 4.0mm², 500mm Length (Optional) |
| Connectors | MC4 compatible |
| Packing | 32PCS/Pallet, 704PCS/40’HC |
About Finergy
Wuxi Finergy Tech Co.,Ltd. is one of the leading solar panels
manufacturers from China. The manufacture plant is loacted in Wuxi
where is only one hundred kilometers away from Shanghai port. The
production capacity of Finergy factory approaches 5,000 pieces of
typical solar panels a day. The products produced by Finergy were
exported to more than 40 countries of the world. The company
management has been ISO9001, ISO14001 and OHSAS18001 approved. All
the mass production solar panels have been CE, IEC61215, IEC61730,
TUV and CQC certificated.
FAQ of Finergy Solar Panels
Q1: How does Finergy produce solar panels?
A: Finergy brought in automatic facilities with robots and
production lines for solar panels manufacturing, which is able to
eliminate human errors and improve quality. Together with ERP, MES,
WMS and CRM information systems, it's available to save waste and
improve production quantity. We can achieve everything queryablity
and traceability.
Q2: Can you sell B grade solar panels with good price?
A: All the solar panels exported from Finergy are grade A products
originally. Because of advanced automatic production equipment and
strict management, 99.5% of the products are grade A quality.
Normally, we sold grade B (unqualified) solar panels to recycling
companies in China domestic. For security reasons, we recommend
customers to use grade A solar panels.
Automatic Equipment & Production Lines
Warehousing & Delivery
